Sophos XG SNMP Interface Data

Hi all,

I have compiled the SNMP MIB files provided by Sophos but I can’t see " [SNMP Interface Data]", other informations are present in “Node-level Performace Data”.

Can you help me for this issue?



Those OIDs in your link are standardized. So for example should work out of the box, if your SNMP config in general is correct.
Can you run a snmpwalk successfully?

What exactly are you trying to achieve?
Also it would help if you provide the MIB.


Hi Mfuhrmann,

Snmpwalk work correctly and I see in opennms CPU,RAM,… except eth info.

IF-MIB::ifOutOctets.1 = Counter32: 367653698
IF-MIB::ifOutOctets.2 = Counter32: 0
IF-MIB::ifOutOctets.3 = Counter32: 0
IF-MIB::ifOutOctets.4 = Counter32: 0
IF-MIB::ifOutOctets.5 = Counter32: 560175888
IF-MIB::ifOutOctets.6 = Counter32: 2705438331
IF-MIB::ifOutOctets.7 = Counter32: 3672166525
IF-MIB::ifOutOctets.8 = Counter32: 4128550778
IF-MIB::ifOutOctets.9 = Counter32: 1145683029
IF-MIB::ifOutOctets.10 = Counter32: 587597691
IF-MIB::ifOutOctets.11 = Counter32: 3238466191
IF-MIB::ifOutOctets.12 = Counter32: 2436220062
IF-MIB::ifOutOctets.13 = Counter32: 3764241706
IF-MIB::ifOutOctets.14 = Counter32: 936950570
IF-MIB::ifOutOctets.15 = Counter32: 16357078
IF-MIB::ifOutOctets.16 = Counter32: 0
IF-MIB::ifOutOctets.17 = Counter32: 0
IF-MIB::ifOutOctets.18 = Counter32: 0
IF-MIB::ifOutOctets.19 = Counter32: 0
IF-MIB::ifOutOctets.20 = Counter32: 105024248

In the node info the net interfaces are present in the section " Node Interfaces" but when I will open “resorce graph” the section dedicated to interfaces is not present " [SNMP Interface Data]"

Thanks for the support

Hi Mfuhrmann,

in the node admin I have selected in " Choose SNMP Interfaces for Data Collection" the interfaces.

Now the graphs are populated.


1 Like